Thông tin sản phẩm
General ordering data
| Version | Power supply, switch-mode power supply unit, 24 V |
| Order No. | 1469510000 |
| Type | PRO ECO 480W 24V 20A |
| GTIN (EAN) | 4050118275483 |
| Qty. | 1 pc(s). |
Dimensions and weights
| Depth | 120 mm |
| Depth (inches) | 4.724 inch |
| Height | 125 mm |
| Height (inches) | 4.921 inch |
| Width | 100 mm |
| Width (inches) | 3.937 inch |
| Net weight | 1,557 g |
Temperatures
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -25 °C…70 °C |
Environmental Product Compliance
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 6d8cdf22-8230-4af8-86c8-3558c716666d |
Input
| AC current consumption | 2,37 A @ 230 V AC / 5,2 A @ 110 V AC |
| AC input voltage range | 85…264 V AC (derating at 100 V AC) |
| Connection system | Screw connection |
| DC current consumption | 1,55 A @ 370 V DC / 4,65 A @ 120 V DC |
| DC input voltage range | 80…370 V DC (Derating @ 120 V DC) |
| Frequency range AC | 47…63 Hz |
| Input frequency | 47…63 Hz |
| Input fuse (internal) | Yes |
| Inrush current | max. 5 A |
| Nominal power consumption | 527.5 VA |
| Rated input voltage | 100…240 V AC |
| Recommended back-up fuse | 6 A / DI, safety fuse 16 A, Char. B, circuit breaker 6…8 A, Char. C, circuit breaker |
| Surge protection | Varistor |
Output
| Capacitive load | unrestricted |
| Connection system | Screw connection |
| Continous output current @ UNominal | 20 A @ 55 °C, 15 A @ 70 °C |
| Nominal output current for Unom | 20 A @ 55 °C |
| Output power | 480 W |
| Output voltage, max. | 28 V |
| Output voltage, min. | 22 V |
| Output voltage, note | (adjustable via potentiometer) |
| Overload protection | Yes |
| Parallel connection option | yes, max. 3 |
| Protection against inverse voltage | Yes |
| Ramp-up time | ≤ 100 ms |
| Rated output voltage | 24 V DC ± 1 % |
| Residual ripple, breaking spikes | < 50 mVPP @ 24 V DC, IN |
General data
| AC failure bridging time @ Inom | > 20 ms @ 230 V AC / > 20 ms @ 115 V AC | ||||||||||||||||||||||||||
| Degree of efficiency | 91% | ||||||||||||||||||||||||||
| Earth leakage current, max. | 3.5 mA | ||||||||||||||||||||||||||
| Housing version | Metal, corrosion resistant | ||||||||||||||||||||||||||
| Indication | Green LED (Uoutput > 21.6 V DC), Yellow LED (loutput > 90 % IRated typ. ), red LED (overload, overtemperature, short-circuit, Uoutput < 20.4 V DC) | ||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
| Max. perm. air humidity (operational) | 5 %…95 % RH | ||||||||||||||||||||||||||
| Mounting position, installation notice | on terminal rail TS 35 | ||||||||||||||||||||||||||
| Power factor (approx.) | > 0.98…230 V AC / > 0.98…115 V AC | ||||||||||||||||||||||||||
| Power loss, idling | 5 W | ||||||||||||||||||||||||||
| Power loss, nominal load | 43 W | ||||||||||||||||||||||||||
| Protection against over-heating | Yes | ||||||||||||||||||||||||||
| Protection against reverse voltages from the load | 30…35 V DC | ||||||||||||||||||||||||||
| Protection degree | IP20 | ||||||||||||||||||||||||||
| Short-circuit protection | Yes | ||||||||||||||||||||||||||
| Surge voltage category | II | ||||||||||||||||||||||||||
EMC / shock / vibration
| Interference immunity test acc. to | EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (burst), EN 61000-4-5 (surge), EN 61000-4-6 (conducted), EN61000-4-8 (Fields), EN61000-4-11 (Dips) |
| Limiting of mains voltage harmonic currents | According to EN 61000-3-2 |
| Noise emission in accordance with EN55032 | Class B |
| Shock resistance IEC 60068-2-27 | 15 g In all directions |
| Vibration resistance IEC 60068-2-6 | 1 g according to EN 50178 |
Insulation coordination
| Insulation voltage input / earth | 2 kV |
| Insulation voltage output / earth | 0.5 kV |
| Insulation voltage, input/output | 3 kV |
| Pollution severity | 2 |
| Protection class | I, with PE connection |
| Surge voltage category | II |
Electrical safety (applied standards)
| Electrical machine equipment | Acc. to EN60204 |
| For use with electronic equipment | Acc. to EN50178 / VDE0160 |
| Protection against dangerous shock currents | Acc. to VDE0106-101 |
| Protective separation / protection against electrical shock | VDE0100-410 / acc. to DIN57100-410 |
| Safety extra-low voltage | SELV acc. to IEC 60950-1, PELV according to EN 60204-1 |
| Safety transformers for switch-mode power supplies | According to EN 61558-2-16 |
Connection data (input)
| Conductor cross-section, AWG/kcmil , max. | 12 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , min. | 0.5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Connection system | Screw connection |
| Number of terminals | 3 for L/N/PE |
| Tightening torque, max. | 0.6 Nm |
| Tightening torque, min. | 0.5 Nm |
| Wire connection cross section, flexible (input), max. | 2.5 mm² |
Connection data (output)
| Conductor cross-section, AWG/kcmil , max. | 10 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , max. | 2.5 mm² |
| Conductor cross-section, flexible , min. | 0.5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Connection system | Screw connection |
| Number of terminals | 7 (++,—,13,14) |
| Tightening torque, max. | 0.6 Nm |
| Tightening torque, min. | 0.5 Nm |
Signalling
| Contact load (NO contact) | max. 30 V DC / 1 A |
| Floating contact | Yes |
| Relay on/off | Output voltage >21.6 V DC/ <20.4 V DC, overload |
Approbations
| Certificate no. (cULus) | E258476 |
| Institute (cULus) | CULUS |
Brand
Brand
Weidmüller
Sản phẩm tương tự
Hỏi đáp
Chưa có đánh giá nào.